Tlog1039 - 12 CAN FD, 10 LIN, and 4 Ethernet Multi-Bus Logger
Tlog1039 - 12 CAN FD, 10 LIN, and 4 Ethernet Multi-Bus Logger
: Product Overview
It features 12 channels for CAN/CAN FD, with adjustable baud rates from 125 Kbps to 1 Mbps for CAN protocol and up to 5 Mbps for CAN FD protocol. There are 10 LIN channels, with baud rates supporting from 0 to 20 Kbps, and the master/slave mode can be software-configured. Additionally, the device supports 2 FlexRay channels with dual-line redundancy for data transmission, offering low latency and flexible bandwidth allocation mechanisms. It supports various data types and rich topological structures. It also includes multiple digital and analog I/O interfaces for convenient signal measurement and system integration.
With the powerful TSMaster software, it supports loading DBC, LDF, XML, ARXML, etc. database files, making it very convenient to monitor, analyze, and simulate various types of bus data, and it also supports functions such as UDS diagnostics, ECU flashing, CCP/XCP calibration, etc.
Features:
- μs (microsecond) level hardware message timestamps to meet advanced requirements
- Drive-free design for Windows systems
- 12 CAN/CANFD, 10 LIN, 2 FlexRay, 4 ETH (switch function)
- Support for DIDO *4 and AIAO *3.
- Configurable CAN baud rate from 125kbps to 1Mbps under CAN protocol; standard CAN FD configuration supports 5Mbps, with optional support up to 8Mbps
- All slave nodes of the LIN bus are software configurable, LIN1-LIN4 support master nodes are software configurable.
- CAN channels support Self-ACK (self-acknowledgement) mode
- Supports BLF format data export and online playback through the PC host software
- Supports multi-device hardware time synchronization
- Integrated GPS functionality
- Equipped with 128GB eMMC onboard storage as standard, expandable up to 8×128GB
- Example project and API interfaces provided, simplifying secondary development
- Provide TCB001 key box for recording data punches.
Typical applications.
- CAN/CAN FD bus data monitoring, collection, and analysis
- FlexRay Bus Flexibility Analysis
- ETH Switch
*Resistor Configuration: No built-in terminating resistor.
Technical Parameters
| Channels | 12* CAN FD 10* LIN 2* FlexRay 4* DIDO 3* AIAO 4* ETH (RJ45 + 3* TE MATEnet for switch functionality) |
| PC interface | RJ45 Ethernet |
| CAN side interface | DB37 Male |
| LIN side interface | DB9 Male |
| FlexRay Terminal Interface | DB9 Male |
| I/O Interface | DB9 Female |
| Driver | Drive-free design for Windows systems |
| Cache | Hardware caching to ensure no frame loss |
| CAN | Supports CAN2.0A and B protocols, conforms to ISO11898-1 specification, baud rate 125Kbps-1Mbps |
| CAN FD | Supports ISO and non-ISO standard CAN FD, baud rates from 125Kbps to 5Mbps (8Mbps requires customization) |
| LIN | Supports LIN 1.3 and LIN 2.x, with baud rates from 0 to 20 kbps |
| FlexRay | FlexRay channel (A and B) |
| Cold start | Support |
| Time Stamp Accuracy | 1μs, hardware message timestamps for high order requirements |
| CAN Termination Resistor | No built-in terminating resistor |
| FlexRay Termination Resistors | No built-in terminating resistor |
| Isolation | Isolation DC 2500 V isolation per CAN/FlexRay channel |
| DIDO | DI：0-40 V Vref：0-3.3 V Threshold range:VAH=(330+499*Vref)/1098; Val=0.455*Vref DO: low 0V, high 12V (not supported for use with loads) |
| AIAO | AI：0-39 V AO：0-30 V |
| Electricity Supply | DC power supply |
| Power Wastage | 10 W |
| Housing Material | metals |
| Sizes | 210*110*47 mm |
| Weights | 2884.4 g |
| Oerating temperature | -40 ℃ ~ 80 ℃ |
| Operating humidity | 10%~90% (no condensation) |
| Working environment | Keep away from corrosive gases |
Parameters
| Parameters | Test Conditions | Minimum Value | Typical Value | Maximum Value | Unit | |
| Operating Voltage | DC power supply | 12x CAN,
10x LIN, 2x
FlexRay, 3x ETH PING, 4x DIDO, 3x AIAO |
9 | 12 | 28 | V |
| Operating Current | DC power supply | 12x CAN,
10x LIN, 2x
FlexRay, 3x ETH PING, 4x DIDO, 3x AIAO |
- | 0.6 | - | A |
| Power Wastage | DC power supply | 12x CAN,
10x LIN, 2x
FlexRay, 3x ETH PING, 4x DIDO, 3x AIAO |
- | 7.2 | - | W |
| CAN Interface | Bus Pin Withstand Voltage | CANH, CAHL | -58 | - | 58 | V |
| Terminating Resistors | Enable termination resistor | - | - | - | Ω | |
| Isolation Withstand Voltage | Leakage current < 1mA | 2500 | - | - | VDC | |
| LIN interface | Bus Pin Withstand Voltage | LIN1, LIN2 | -40 | - | 40 | V |
| FlexRay Interface | Bus Pin Withstand Voltage | FlexRay_BM, FlexRay_BP | -60 | - | 60 | V |
| Terminating Resistors | Enable termination resistor | - | - | - | Ω | |
| Isolation Withstand Voltage | Leakage current < 1mA | 2500 | - | - | VDC | |
| EMC | EFT | IEC61000-4-4 Standard | 2 | - | - | kV |
Additional information
Download
Simplified Chinese
English version
Simplified Chinese
English version
Software package
Software package
Software package
FAQ
Please keep in mind
Caution! Electrostatic discharge (ESD) may damage or destroy components on the card. Please take precautions to avoid electrostatic discharge.
Before using the device, please carefully review the pinout information in the product manual. During operation of the device, be sure to connect the power cord correctly and avoid plugging and unplugging.
