Tlog1039 – 12 路 CAN FD、10 路 LIN 多总线记录仪
Tlog1039 – 12 路 CAN FD、10 路 LIN 多总线记录仪
: Product Overview
12 路CAN/CAN FD，在CAN 协议下波特率125kbps -1Mbps 可调，CAN FD 协议下波特率标准配置最大支持5Mbps，高速配置最大支持8Mbps（选配）；10 路LIN 从节点可软件配置，其中LIN1 – LIN4 支持主节点可软件配置，支持0-20kbps 波特率；同时内置多路数字和模拟I/O接口，方便于多种信号测量和系统集成。
With the powerful TSMaster software, it supports loading DBC, LDF, XML, ARXML, etc. database files, making it very convenient to monitor, analyze, and simulate various types of bus data, and it also supports functions such as UDS diagnostics, ECU flashing, CCP/XCP calibration, etc.
Features:
- μs (microsecond) level hardware message timestamps to meet advanced requirements
- Drive-free design for Windows systems
- 12 路CAN/CAN FD，10 路LIN，4 路ETH（交换机功能）
TLog1039 本身仅提供 1 个 TX 接口。在实际使用时，客户的 PC + TLog1039 + 被测件（DUT） 需要通过以太网组成同一网络，设计是将交换机直接集成到设备内部，让客户使用更方便、布线更简洁，其功能与外接交换机完全一致，并未改变原有的网络架构或测试逻辑. - Support for DIDO *4 and AIAO *3.
- Configurable CAN baud rate from 125kbps to 1Mbps under CAN protocol; standard CAN FD configuration supports 5Mbps, with optional support up to 8Mbps
- All slave nodes of the LIN bus are software configurable, LIN1-LIN4 support master nodes are software configurable.
- CAN channels support Self-ACK (self-acknowledgement) mode
- Supports BLF format data export and online playback through the PC host software
- Supports multi-device hardware time synchronization
- Integrated GPS functionality
- 默认配置为256GB eMMC, 最高可选配至8×128GB
- Example project and API interfaces provided, simplifying secondary development
- Provide TCB001 key box for recording data punches.
Typical applications.
- CAN/CAN FD bus data monitoring, collection, and analysis
- ETH Switch
*Resistor Configuration: No built-in terminating resistor.
*此款产品不具备ETH, DIDO, AIAO 离线记录功能
Technical Parameters
| Channels | 12* CAN FD 10* LIN 4* DIDO 3* AIAO 4* ETH (RJ45 + 3* TE MATEnet for switch functionality) |
| PC interface | RJ45 Ethernet |
| CAN side interface | DB37 Male |
| LIN side interface | DB9 Male |
| I/O Interface | DB9 Female |
| Driver | Drive-free design for Windows systems |
| Cache | Hardware caching to ensure no frame loss |
| Time Stamp Accuracy | 1μs, hardware message timestamps for high order requirements |
| CAN | Supports CAN2.0A and B protocols, conforms to ISO11898-1 specification, baud rate 125Kbps-1Mbps |
| CAN FD | Supports ISO and non-ISO standard CAN FD, baud rates from 125Kbps to 5Mbps (8Mbps requires customization) |
| LIN | Supports LIN 1.3 and LIN 2.x, with baud rates from 0 to 20 kbps |
| CAN Termination Resistor | No built-in terminating resistor |
| Isolation | CAN通道 DC 2500V 隔离 |
| DIDO | DI: 0–40 V Vref: 0–3.3 V Threshold range:VAH=(330+499*Vref)/1098; Val=0.455*Vref DO: low 0V, high 12V (not supported for use with loads) |
| AIAO | AI: 0-39 V AO: 0–30 V |
| Electricity Supply | DC power supply |
| Power Wastage | 10 W |
| Housing Material | metals |
| Sizes | 210 × 110 × 47 mm |
| Weights | 2884.4 g |
| Oerating temperature | -40°C to 80°C |
| Operating humidity | 10%~90% (no condensation) |
| Working environment | Keep away from corrosive gases |
Parameters
| Parameters | Test Conditions | Minimum Value | Typical Value | Maximum Value | Unit | |
| Operating Voltage | DC power supply | 12 路 CAN 收发，10 路 LIN 收发， 3x ETH PING, 4x DIDO, 3x AIAO |
9 | 12 | 28 | V |
| Operating Current | DC power supply | 12 路 CAN 收发，10 路 LIN 收发， 3x ETH PING, 4x DIDO, 3x AIAO |
- | 0.6 | - | A |
| Power Wastage | DC power supply | 12 路 CAN 收发，10 路 LIN 收发， 3x ETH PING, 4x DIDO, 3x AIAO |
- | 7.2 | - | W |
| CAN Interface | Bus Pin Withstand Voltage | CANH, CAHL | -58 | - | 58 | V |
| Terminating Resistors | Enable termination resistor | - | - | - | Ω | |
| Isolation Withstand Voltage | Leakage current < 1mA | 2500 | - | - | VDC | |
| LIN interface | Bus Pin Withstand Voltage | LIN1, LIN2 | -40 | - | 40 | V |
| EMC | EFT | IEC61000-4-4 Standard | 2 | - | - | kV |
Additional information
Download
Simplified Chinese
English version
Simplified Chinese
English version
Software package
Software package
Software package
FAQ
如果我需求四路通道的以太网离线记录功能，这款产品合适吗？
Please keep in mind
Caution! Electrostatic discharge (ESD) may damage or destroy components on the card. Please take precautions to avoid electrostatic discharge.
Before using the device, please carefully review the pinout information in the product manual. During operation of the device, be sure to connect the power cord correctly and avoid plugging and unplugging.
